We regularly update articles related to the manufacturing industry.
Plasma cutting uses ionized gas to form a high-temperature channel that cuts through metal. This method offers a good balance between cut quality and cost for stainless steel. It works well for both prototypes and large production runs. The edges are cleaner than those from oxy-fuel cutting. Plasma cutting is also more budget-friendly than laser cutting and suitable for many uses.
Phosphating is a chemical process in which a phosphate coating is applied to a metal surface. This coating is a difficult-to-dissolve transformation layer composed of metal phosphates. It acts as a protective layer, shielding the metal from corrosion, wear, and other environmental damage.
Phosphating works through chemical reactions between the metal surface and a phosphate solution. When the metal is immersed in the solution, the phosphoric acid reacts with the metal ions to form a layer of insoluble phosphate crystals.
E-Coating, or Electrophoretic Deposition, refers to a specific type of paint applied to metal parts. It involves immersing the parts in a bath of paint particles suspended in water. When we apply an electric charge, the paint particles stick to the metal surface.
Getting good results when grinding stainless steel starts with choosing the right tools and methods. Use aluminum oxide or ceramic abrasives made explicitly for stainless steel. Keep the metal cool during grinding to avoid heat discoloration. Work with light to medium pressure and move constantly to prevent overheating one area.
Metal burrs can be small and sharp protrusions on metal edges after machining operations such as drilling or milling. These are bits of metal that have not been removed cleanly from a part. They can leave a jagged or rough edge.
A welding fixture is a device or tool used to hold and position workpieces during welding. It ensures parts stay aligned correctly, making the welding process more accurate and efficient. These fixtures are used in manual and automated welding for precise and repeatable results.
A fly cutter is a rotary cutting tool that attaches to a milling machine spindle and rotates to remove material. The cutting bit extends from the tool body and cuts in an arc pattern with each rotation, creating a smooth, flat surface.
The tool creates flat surfaces because the cutting edge is set at a consistent height. Each pass removes a thin material layer, and the milling machine’s feed movement creates a flat surface. This process is sometimes called “fly cutting” because of the cutting edge’s sweeping motion.
Springback is the term used to describe the geometric changes made to an object as it attempts to return to its initial shape at the end of a forming process. This type of deformation can affect the accuracy of the final part. You can tackle this issue by adjusting process parameters or adopting compensatory strategies.
Welding defects can affect a weld’s strength, durability, and appearance. Cracks, porosity, and inclusions are some of the most common types. Other types include lack of fusion or penetration, undercuts, overlaps, weld mismatches, excessive penetration, and distortion. By identifying and preventing them, you can improve the appearance and strength of your welds.
Electrical Discharge Machining (Sinker EDM) is a metal removal process that uses electrical sparks to remove material from the workpiece. This process involves submerging the electrode and the workpiece in dielectric fluid. High-frequency electrical pulses then erode and melt the surface of the piece.
Laser soldering uses a focused laser beam to melt solder and join materials. The laser heats the solder without touching the parts, creating a clean and strong bond. This method is ideal for delicate or complex components where precision matters.
Unlike traditional soldering, laser soldering doesn’t require physical contact, reducing the risk of damaging sensitive parts. It’s a noninvasive technique that delivers consistent results.
A CNC fixture is a device that holds and positions a workpiece during machining operations. Fixtures keep parts stable and correctly aligned, while cutting tools remove material. They make sure each part comes out the same way every time.
Nickel plating is a process that applies a thin layer of nickel to a metal surface using an electrochemical method. The nickel layer adds extra protection and improves the metal’s appearance.
Nickel plating creates a protective barrier that prevents oxidation and surface damage. It extends the lifespan of stainless steel components and enhances their performance in harsh environments. Industries use it for both functional and decorative purposes.
Titanium is lighter, stronger, and more corrosion-resistant than stainless steel. It’s ideal for aerospace, medical implants, and high-performance applications. Stainless steel, on the other hand, is more affordable, easier to machine, and better for everyday use, such as kitchen appliances or construction.
Both brazing and welding join metals but differ in temperature, the process, and the filler used. Brazing is melting and flowing a filler material with a lower melt point than the workpieces over the joint. Welding involves melting the workpieces and adding filler metals to the joint.
Boring machining involves enlarging and finishing a predrilled hole to exact dimensions and surface finish using a single-point cutting tool or a bored head containing several tools. This is crucial to achieving the precision and accuracy required by complex machinery.
Our working hours： Please feel free to contact us
Mon-Sat: 8:00 am – 8:30 pm
Phone: +86 0769-81150309
Email: [email protected]
Copyright @ 2023 Shengen. All Rights Reserved.
We will contact you within 1 working day, please pay attention to the email with the suffix”@goodsheetmetal.com”
